Search results

transcribed. A dedicated program, the spooler, maintains an orderly sequence of jobs for the peripheral and feeds it data at its own rate. Conversely,...

recording in which the recording tape is spooled between reels. To prepare for use, the supply reel (or feed reel) containing the tape is placed on a...

follows is part of a new page. A page break causes a form feed to be sent to the printer during spooling of the document to the printer. Thus it is one of the...

feeds air directly to the exhaust manifold, where it is mixed with partially combusted gasses from the engine, thus igniting them again and spooling up...

wound spool of line in the trimmer head; the user instead feeds the pre-cut line in to the appropriate slots, making the trimmer easier to feed line into...

text editor like Notepad). The concepts of carriage return (CR) and line feed (LF) are closely associated and can be considered either separately or together...

of high-bypass turbofans produced by Rolls-Royce. It continues the three spool architecture of the RB211 with a maximum thrust ranging from 61,900 to 97...

where Norman Bates is still running the Bates Motel with the corpse of Emma Spool still sitting up in the house. A suicidal nun, with whom Norman falls in...

form of fixed-spool spinning reel in 1905. When casting Illingworth's reel design, the line was drawn off the leading edge of the spool but was restrained...

powered the DC-10. In theory, the triple spool would produce the same or more power as existing double spool engines while having a smaller cross section...

hole in the fabric which they pass through. The upper thread runs from a spool kept on a spindle on top of or next to the machine, through a tension mechanism...

beltless feed for the MG08/15. It was followed by a somewhat similar device for the MP/18/I submachine gun—this consisted of a 60-round circular, spool magazine...

fashion. There are numerous types of knitting machines, ranging from simple spool or board templates with no moving parts to highly complex mechanisms controlled...

attaching incoming paper onto the new spool. The spool is then lowered onto the secondary arms, which steadily guide the spool away from the reel drum as the...

SMAW, GMAW, or GTAW. Changing filler metals requires changing an entire spool. This can be slow and difficult as compared to changing filler metal for...

stator) to feed power to the rotor. These transformers have stationary primaries, and rotating secondaries. The secondary is somewhat like a spool wound with...

The Bristol Siddeley Orpheus is a single-spool turbojet developed by Bristol Siddeley for various light fighter/trainer applications such as the Folland...

it in a disk storage area generically called a "spool". There are several common ways in which the spool may be organized: One file per article is the oldest...

cold end pulls material from the spool, using gear- or roller-based torque to the material and controlling the feed rate by means of a stepper motor....

also have less chance of tangling the filament while it unwinds from the spool. Additionally, they reduce the mass of the extrusion carriage because it...